Haomei Aluminum Suppliers English Español Российская

Aluminum Plates

Aluminum Plate is a rolled product of greater than 5 mm of thickness, highly resistant, light, corrosion resistant and easily worked, which allows it to be used in many applications.

Characteristics of Aluminum Plate

Units

Thickness
Width (Diam.)Length

minmaxminmaxminmax
Inches0.1979.843264839144
mm550065026001,00010000



Product AlloyTemperThicknessmmWidthLength
1050 pure aluminum plateO,H12,H14,H16,H18,H1120.15mm~350mm2200mm under12000mm under
1060 pure aluminum plateO,H12,H14,H16,H18,H1120.15mm~350mm2200mm under12000mm under
1100 pure aluminum plateO,H12,H14,H16,H18,H1120.15mm~350mm2200mm under12000mm under
1050/1060/1100 big five bar pattern plateO,H12,H14,H16,H18,H1121.0mm~20mm1900mm12000mm under
1050/1060/1100 Pointer pattern plateO,H12,H14,H16,H18,H1121.0mm~20mm1900mm under12000mm under
3003 Anti rust aluminum plateO,H12,H14,H16,H18,H22,H24
H26,H28,H112,F
0.15mm~350mm2200mm under12000mm under
3004 Anti rust aluminum plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H28,H112,F
0.15mm~350mm2200mm under12000mm under
3003/3004 big five bar pattern plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H28,H112,F
1.0mm~20mm1900mm under12000mm under
3003/3004 Pointer pattern aluminum plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H28,H112,F
1.0mm~20mm1900mm under12000mm under
5052 aluminum Alloy plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H38,H112,F
0.15mm~350mm2200mm under12000mm under
5083 aluminum Alloy plateO,H111,H12,H14,H16,H22,H24,
H26,H112,F
0.8mm~150mm2200mm under11000mm under
5754 aluminum Alloy plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H38,H112,F
0.8mm~150mm2200mm under11000mm under
5A05 aluminum Alloy plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H38,H112,F
0.8mm~150mm2200mm under11000mm under
5A06 aluminum Alloy plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H38,H112,F
0.8mm~150mm2200mm under11000mm under
5052/5083/5754/ 5A05/5A06 big five bar pattern plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H38,H112,F
1.0mm~20mm1900mm under12000mm under
5052/5083/5754/ 5A05/5A06 Pointer pattern aluminum plateO,H111,H12,H14,H16,H18,H22,
H24,H26,H38,H112,F
1.0mm~20mm1900mm under12000mm under
6061/6063/6082/ 6A02 aluminum Alloy plateO,H14,H24,H22,H112,T4,T60.8mm~150mm2200mm under11000mm under
6061/6063/6082/ 6A02 big five bar pattern plateO,H14,H24,H22,H112,T4,T61.0mm~20mm1900mm under12000mm under
6061/6003/6082/ 6A02 Pointer pattern aluminum plateO,H14,H24,H22,H112,T4,T61.0mm~20mm1900mm under12000mm under



Producing aluminum plate
Rolling begins with preheated sheet ingots that can weigh more than 20 tons. As the size of rolling mills has increased, so has the size of these ingots, but a typical ingot is approximately 6 feet wide, 20 feet long and more than 2 feet thick. The ingot is first heated to rolling temperature and fed into a breakdown mill, where it is rolled back and forth until the thickness has been reduced to just a few inches. The slab can be subsequently cold rolled or may be heat-treated to increase its strength. The highest strength alloys are heat treated and rapidly cooled to room temperature, after which they are stretched to straighten and relieve internal stress built up during rolling and heat-treating. They are aged naturally at room temperature or artificially aged in a furnace to develop the desired combination of strength and corrosion resistance. Finally, the plate is trimmed to final size. Plates produced in this manner may be used at full thickness, but are often machined into a variety of simple to complex shapes.

Aluminum plate applications
Plate is used in heavy-duty applications such as those found in the aerospace, military and transportation product manufacturing. Aluminum plate, machined to shape, forms the skins of jets and spacecraft fuel tanks. It is used for storage tanks in many industries, in part because some aluminum alloys become tougher at supercold temperatures. This property is especially useful in holding cryogenic (very-low-temperature) materials. Plate is also used to manufacture structural sections for railcars and ships, as well as armor for military vehicles.


Contact Us

* Fields with an asterisk are required